振动电机安装使用
2021-11-11 10:08
振动电机安装使用
安装 Moumting
振动电机的安装面必须平整，安装表面的平面度公差应低于0.25mm，以确保螺栓拧紧时振动电机壳体产生的内应力最小，从而避免底脚的断裂。振动电机底脚螺栓应根据孔径选用相应不低于8.8级的高强度螺栓和8级的螺母及平垫。
下表是各类相关螺栓的拧紧力矩,请务必按相对应的力矩拧紧底脚螺栓。
电机设备安装面 Motor/Machine interface
| 螺栓Screw | 垫片Washer | 拧紧力矩Clampingtorque | |||
| 公制Metric | 英制Imperial | 公制Metric | 英制平垫 ImperialFlatwasher | (Nm) | (ft-lb] |
| M6 | 1/4" | 6.4x12 | 1/4" | 9 | 6.5 |
| M8 | 5/16" | 8.4x16 | 5/16" | 23 | 16.5 |
| M10 | 3/8" | 10.5x20 | 3/8" | 45 | 33 |
| M12 | 1/2" | 13x24 | 1/2" | 80 | 58 |
| M16 | 5/8" | 17x30 | 5/8" | 185 | 137 |
| M20 | 13/16" | 21x37 | 13/16" | 373 | 275 |
| M22 | 7/8" | 23x39 | 7/8" | 550 | 411 |
| M24 | 15/16" | 25x44 | 15/16" | 696 | 513 |
| M27 | 1” | 28x50 | 1" | 873 | 645 |
| M36 | 1-3/8" | 37x66 | 1-3/8" | 1,864 | 1,370 |
| M42 | 1-5/8" | 43x78 | 1-5/8" | 2,850 | 2,102 |
固定FIXING
Smooth through hole+sCreW +flat washer+nut and counternut
盲孔+螺栓+平垫
Tapped threaded hole+screw +flat washer
安装面平面度公差SURFACE FLATNESS TOLERANCE
安装面经过加工且禁止涂漆
MACHINED &NOTPAINTED sUPPORTPLATE
滨河电机主营产品：振动电机、卧式振动电机、法兰式振动电机（侧板振动电机）、防爆振动电机和立式振动电机。欢迎来电咨询选型